Go back

Kintra Fibers Project

Fashion for Good alumni, Kintra Fibres produces a biopolymer which is a replacement for virgin polyester. Polybutylene succinate or PBS is a biopolymer made using industrial sugarcane as a feedstock, it is also biodegradable in aerobic conditions.

Problem Statement

The apparel industry faces immense pressure to meet the 1.5°C target set by the Paris Agreement, with fashion accounting for 2-8% of global greenhouse gas emissions. Scope 3 emissions, especially from processing (Tier 2), represent a critical challenge. Shifting to dry processing technologies has the potential to reduce water and energy use, contributing to lower emissions and a smaller environmental footprint.

Stakeholders involved

The D(R)YE Factory of the Future project brought together key industry leaders and innovators committed to revolutionizing textile processing. The project’s brand stakeholders included:

Go back

Full Circle Textiles Project – Polyester (FCTP-P)

The aim of the Full Circle Textiles Project – Polyester (FCTP-P) is to validate and scale promising technologies in polyester chemical recycling and to encourage financing and offtake commitments in the fashion industry. The project builds on the framework and lessons of the Full Circle Textiles Project – Cellulosics (FCTP-C), which focused on investigating economically viable and scalable solutions for cellulosic chemical recycling. It brings together a consortium of stakeholders including brands, innovators, supply chain partners and catalytic funders – a structure that has proven successful in driving and scaling disruptive innovation in the industry. This is an ongoing project.

Problem Statement

The apparel industry faces immense pressure to meet the 1.5°C target set by the Paris Agreement, with fashion accounting for 2-8% of global greenhouse gas emissions. Scope 3 emissions, especially from processing (Tier 2), represent a critical challenge. Shifting to dry processing technologies has the potential to reduce water and energy use, contributing to lower emissions and a smaller environmental footprint.

Stakeholders involved

The D(R)YE Factory of the Future project brought together key industry leaders and innovators committed to revolutionizing textile processing. The project’s brand stakeholders included:

Go back

Biophilica Pilot

This pilot aimed to test, refine, and scale Treekind®, an alternative to animal and synthetic leathers made from green waste. The project focused on assessing the material’s performance, scalability, and manufacturing capabilities, aiming to produce 500 sqm of Treekind® for product applications.

Problem Statement

The apparel industry faces immense pressure to meet the 1.5°C target set by the Paris Agreement, with fashion accounting for 2-8% of global greenhouse gas emissions. Scope 3 emissions, especially from processing (Tier 2), represent a critical challenge. Shifting to dry processing technologies has the potential to reduce water and energy use, contributing to lower emissions and a smaller environmental footprint.

Stakeholders involved

The D(R)YE Factory of the Future project brought together key industry leaders and innovators committed to revolutionizing textile processing. The project’s brand stakeholders included:

Go back

Ecovative Collaborative Pilot

The aim of the pilot was to develop and test the next generation of mycelium-based alternatives to leather and foam materials. This project, spanning from December 2021 to March 2024, involved collaboration with major fashion brands to create sustainable materials suitable for consumer goods.

Problem Statement

The apparel industry faces immense pressure to meet the 1.5°C target set by the Paris Agreement, with fashion accounting for 2-8% of global greenhouse gas emissions. Scope 3 emissions, especially from processing (Tier 2), represent a critical challenge. Shifting to dry processing technologies has the potential to reduce water and energy use, contributing to lower emissions and a smaller environmental footprint.

Stakeholders involved

The D(R)YE Factory of the Future project brought together key industry leaders and innovators committed to revolutionizing textile processing. The project’s brand stakeholders included:

Go back

Agriwaste Natural Fibres

The aim of the project was to explore the use of agricultural residues to produce natural fibres, reducing reliance on conventional fibres like cotton. Building on the findings of the Laudes Foundation commissioned report ‘Spinning Future Threads’.

Problem Statement

The apparel industry faces immense pressure to meet the 1.5°C target set by the Paris Agreement, with fashion accounting for 2-8% of global greenhouse gas emissions. Scope 3 emissions, especially from processing (Tier 2), represent a critical challenge. Shifting to dry processing technologies has the potential to reduce water and energy use, contributing to lower emissions and a smaller environmental footprint.

Stakeholders involved

The D(R)YE Factory of the Future project brought together key industry leaders and innovators committed to revolutionizing textile processing. The project’s brand stakeholders included:

Go back

Renewable Carbon Project

The aim of the project was to test and validate the technical feasibility of the different PHA polymer and composite resins to make mono and multifilament fibres. Fashion for Good worked with the Nonwovens Innovation & Research Institute (NIRI) to run the melt spinning trials to allow for a comparative evaluation. The initial scope of the project also included end of use testing including degradation testing. However the project partners decided to prioritise additional spinning trials over degradation testing.

Problem Statement

The apparel industry faces immense pressure to meet the 1.5°C target set by the Paris Agreement, with fashion accounting for 2-8% of global greenhouse gas emissions. Scope 3 emissions, especially from processing (Tier 2), represent a critical challenge. Shifting to dry processing technologies has the potential to reduce water and energy use, contributing to lower emissions and a smaller environmental footprint.

Stakeholders involved

The D(R)YE Factory of the Future project brought together key industry leaders and innovators committed to revolutionizing textile processing. The project’s brand stakeholders included:

Go back

From Waste to Black Pigment

The aim of the project was to validate the use of  black pigments derived from waste materials to replace conventional carbon black from virgin fossil fuels in dope dyeing applications. The aim is to reduce the environmental impact of textile dyeing by using renewable, eco-friendly pigments sourced from waste.

Problem Statement

The apparel industry faces immense pressure to meet the 1.5°C target set by the Paris Agreement, with fashion accounting for 2-8% of global greenhouse gas emissions. Scope 3 emissions, especially from processing (Tier 2), represent a critical challenge. Shifting to dry processing technologies has the potential to reduce water and energy use, contributing to lower emissions and a smaller environmental footprint.

Stakeholders involved

The D(R)YE Factory of the Future project brought together key industry leaders and innovators committed to revolutionizing textile processing. The project’s brand stakeholders included:

Go back

Dyestuff Library

This project was designed to address the gap in knowledge and infrastructure for sustainable dyes by developing a tool to identify, assess, and select innovative dyestuffs based on specific metrics and fabric requirements. The project collaborates with brands, supply chain partners, and industry stakeholders to conduct comprehensive evaluations, aiming to facilitate an industry shift toward sustainable dye options. Structured in multiple rounds, each involving five innovators, the project includes trials at both lab and pilot scales, with support and guidance for participating innovators.

Problem Statement

The apparel industry faces immense pressure to meet the 1.5°C target set by the Paris Agreement, with fashion accounting for 2-8% of global greenhouse gas emissions. Scope 3 emissions, especially from processing (Tier 2), represent a critical challenge. Shifting to dry processing technologies has the potential to reduce water and energy use, contributing to lower emissions and a smaller environmental footprint.

Stakeholders involved

The D(R)YE Factory of the Future project brought together key industry leaders and innovators committed to revolutionizing textile processing. The project’s brand stakeholders included:

Go back

Sorting For Circularity Europe

The Sorting for Circularity Europe project was launched in early 2021 and initiated by Fashion for Good together with Circle Economy. The project was made possible by catalytic funding from Laudes Foundation and brand partners, adidas, BESTSELLER, Inditex and Zalando, with H&M Group as key project partners. The project addressed the need for data on textile waste in the market, identifying waste types and recycling opportunities.

Problem Statement

The apparel industry faces immense pressure to meet the 1.5°C target set by the Paris Agreement, with fashion accounting for 2-8% of global greenhouse gas emissions. Scope 3 emissions, especially from processing (Tier 2), represent a critical challenge. Shifting to dry processing technologies has the potential to reduce water and energy use, contributing to lower emissions and a smaller environmental footprint.

Stakeholders involved

The D(R)YE Factory of the Future project brought together key industry leaders and innovators committed to revolutionizing textile processing. The project’s brand stakeholders included:

Go back

Viscose Traceability Pilot

In December 2020, Fashion for Good launched a pilot to test the TextileGenesis™ platform, a blockchain-based solution for tracing sustainable viscose fibres. This pilot involved several partners including Bestseller, Kering and Zalando, in addition to manufacturers Lenzing, ENKA and Tangshan Sanyou. The pilot’s aim was to test the TextileGenesis™ platform and trace responsibly sourced viscose through digital and physical means across the supply chain.

Problem Statement

The apparel industry faces immense pressure to meet the 1.5°C target set by the Paris Agreement, with fashion accounting for 2-8% of global greenhouse gas emissions. Scope 3 emissions, especially from processing (Tier 2), represent a critical challenge. Shifting to dry processing technologies has the potential to reduce water and energy use, contributing to lower emissions and a smaller environmental footprint.

Stakeholders involved

The D(R)YE Factory of the Future project brought together key industry leaders and innovators committed to revolutionizing textile processing. The project’s brand stakeholders included: